The secret to not charging bottle

The tips below will help smaller users to extend battery life and minimize the phenomenon of "bottle" pin for touch devices.

There are many reasons to touch the device's battery faster loss of use, one of which is this department is not charged and properly maintained.

Just use the standard charger

Today's battery types smartphone and tablet usually large, so the charger will come with high capacity rechargeable battery to be quickly filled. For example, the output of the charger iPad is 2,100 mAh, double power capacity by the USB port on your computer should be provided to make a huge difference when using the original charger and USB port to charge your iPad.

Therefore, in order to shorten the charging time for tablet and smartphone, you should use the original charger that came with your camera, some devices have special circuit to prevent the battery absorbs all the energy from the external charger, long as the device is full battery life....

Note when charging via USB

In the case of non-standard charger, you can charge the battery through the USB port of the computer. Some newer computers today are designed with 2 kinds of USB ports: USB port and USB port standard for exchanging common data.

The difference of the two basic types of ports are located at the energy that we offer: standard USB port only provides 100 mAh, while the USB port provides charging power 5 times compared with standard USB port . This is why when you connect the device to the USB port of the computer, the device will be charging slow or is it not likely to be any batteries at all

Today many firms laptop incorporates 2 types of ports. And the only way to distinguish the type of connector is plug the device into each port a try. You should carefully read the user manual to know which type of laptop USB ports are supported before deciding whether to charge the battery of sensors connected to a computer.

Another note is that you should not charge the phone via USB hub (hub), so the current will be evenly distributed to the USB port of the hub it will not provide enough power for your device .

Please charge the battery properly

With any type of device, the first battery charge is very important because it will help storage device initial information about the battery. Therefore, you should charge the first time in at least 12 hours, then draw charger, used until exhausted battery charge before starting 2nd.

Average number of charging less, the battery life will last longer. This means that you should allow the battery consumption is about half or less than it should be charged, the battery will "live well" over. Whether you can charge the battery at any time, but it is best not to constantly plugged charging every day.

Also at least once a month you should use empty then fully charge the battery (battery discharge).This will help keep the battery in good condition to protect the chemical composition of the battery.