Installation instructions LBBMF9 on I9500 Galaxy S4 (VN) Android 4.2.2

Saturday, 31 August 20130 Comment


Recently, an update to Android 4.2 .2 for product Galaxy S4 was launched. You will have to flash it manually (by hand), follow the instructions below if you want to install Android 4.2.2 on I9500 Galaxy S4 LBBMF9 (...)
To conduct flash stock Android 4.2.2 Jelly Bean firmware in I9500 Galaxy S4, we use ODIN.During the installation process you can lose all the installed applications and data.
Note : ROM is not available for devices other than Samsung Galaxy I9500 TECH-ZOOM S4 is not responsible for any damage that happens to your device. Although it will be difficult gettingerror if you get it right with the wizard.
The work to be done before the ROM install.
  • Backup data is to be lost in the process if installation can recover.
  • Certainly installed USB Driver with appropriate equipment.
  • Check the battery, the battery needs at least 60%
  • EFS Backup Folder to store IMEI and other important data.
  • Make sure USB Debugging is enabled.
  • Odin only works on the window, so if the computer you use Mac OS or Linux OS to use CrossOver to run Odin Utility
Custom ROM for the I9500 Galaxy S4

Carry out installation

  • Download the zip file and unzip on, you will receive a tar.md5 file and some other files.
  • Extract the zip file and you will get Odin Odin3 v3.07.exe along with some other files.
  • Turn off the phone, wait phone vibrating alert to make sure the power is off.
  • Put phone I9500 galaxy s4 on the "Download Mode"
  • Conducting run Odin3 v3.07.exe file
  • Connect your device to your computer via port USB.Mot message will display in the message box at the bottom Odin press "add". If you do not get to try another USB port on the computer.
  • Next select the file containing the above extract files
- Click the PDA button, select the file tar.md5.
- Click the phone: select * modem * files with names similar to it.
- Click CSC button: select * CSC * files with names similar to it.
- Click PIT button, select the file. Pit
  • In the Odin window, make sure the device reboots and choose F.reset Time.
  • Check back two steps (select the file and windown)
  • After completing the flash computer, your phone will reboot and you will quickly see a PASS message with a green background in the box at the top left of Odin.
Pretty much you can remove the cable and use LBBMF9 I9500 Android 4.2.2 on the deviceSamsung Galaxy S4.
Bookmark:

Post a Comment

Message from admin:
Thank you for your interest in our article.
We will proceed to consider and answer your questions
---Android Software Development Team---

 
Beatstechnology Copyright 2014: Tech-Zoom.com - Digital Technology - All Rights Reserved