Official Methods of Root Android 4.2.2 Firmware running on the I9505 Galaxy S4

Recently, Samsung Galaxy S4 I9505 (international version LTE) was able to update the XXUDMH6 official Android 4.2 .2 Jelly Bean . As you know that when installing a new firmware update you need to remove root access and perform root process again to run applications that require root permissions. So if you are interested in methods root Android 4.2.2 running on OfficialGalaxy I9505 S4, the following article will guide you.

Note:

• This original method for S4 Galaxy GT-I9505 running on Android 4.2.2 Jelly Bean I9505XXUDMH6 firmware update from Samsung KIES. Procedure is quite simple, but can still lose personal data in the root.
• Warranty of the device will be disabled when you root, it can be restored if you proceed to flash software it official.
• Tech-zoom will not be responsible for any errors on your device. Please follow the guidelines in order to achieve good results.

Should be prepared to check the following factors

• Backup important data. Avoid case when the data set is deleted.
• Check the battery and make sure to reach over 60%.
• Already USB Driver for LG Nexus 4 machine
• Make sure USB Debugging is enabled prior to installation.
• Installation Instructions use ODIN utility which is only available on Windows operating systems. If you use the Linux operating system (such as Ubuntu) and Mac OS then use the utility to run ODIN Intersect in your operating system.

Reminders

By following this guide, you will only get root. Need to install custom recovery like ClockworkMod recovery to flash custom ROM separately or hack the I9505 Galaxy S4.

Download the following link.

• 
  I9505XXUDMH6 CF Auto Root for Android 4.2.2 Firmware <> [Filename: CF-Auto-Root-jflte-jfltexx-gti9505.tar]
• 
  Odin 3:07

Installation Method

• Extract the zip file and you will get Odin Odin3 v3.07.exe along with some other files.
• Turn off the phone, vibrating alert waiting to make sure the power is off
• Put phone I9500 galaxy s4 on the "Download Mode" by pressing and holding Volume Down and Home keys while pressing the Power button.
• Conducting run Odin3 v3.07.exe file
• Connect your device to your computer via port USB.Mot message will display in the message box at the bottom Odin press "add". If you do not get to try another USB port on the computer. or reinstall the drivers.
• Next select the file containing the above extract files: Click the PDA button and select CF-Root-Auto-jflte-jfltexx-gti9505.tar.
• In the Odin window, make sure the device reboots and choose F.reset Time.
• Check everything mentioned above two steps. Now, when you're satisfied press the START button to begin the flashing process.
• After completing the flash computer, your phone will reboot and you will quickly see a PASS message with a green background in the box at the top left of Odin.